HP LaserJet Pro MFP M130fw Scanner Setup

Below is the way to do the HP LaserJet Pro MFP M130fw Setup for the scanning.

Scan setup on HP LaserJet Pro MFP M130fw Setup

•                     After you have finished the basic setup HP LaserJet Pro MFP M130fw you can proceed with the paper and scan setup

•                     First, you have to do the cartridge set up and paper setup

•                     Open the cartridge compartment of the HP LaserJet Pro MFP M130fw Setup

•                     Unpack the black and color cartridges you received while procuring the printer

•                     Take care not to touch the contact and nozzles of the cartridges

•                     Then, fix the black cartridge in the right side and the color cartridges on the left side of the cartridge holder

•                     Next, close the printer’s top cover and tap OK on the control panel

•                     Then proceed with the paper setup process

•                     Load some paper into the paper tray of the HP LaserJet Pro MFP M130fw printer

•                     Remember to place the paper in the tray appropriately the paper should be of good quality

•                     Likewise, set the paper guides and then, close the input tray

•                     Then, go to the control panel and click on Yes and Done

•                     Subsequently, the calibration of the HP LaserJet Pro MFP M130fw printer will begin and soon an alignment page will print

•                     Check if the print specifications are correct

•                     Now, scan the alignment page

•                     Carefully, open the scanner cover and keep the paper as per the guidelines and close the cover and tap OK

•                     The scanning of alignment page will begin, see if the scanned copy looks good

•                     Now, tap OK in the alignment success message displaying on the control panel and then tap on Finish,

•                     The scan setup for HP LaserJet Pro MFP M130fw is successfully done

Scanner troubleshooting

Installation and there upon re-installation the printer software

Firstly, check if there is a problem with the printer software installation. If there is a problem with the printer software the printer's old software should be uninstalled and then install the new software.

Verify the settings of Windows Image Acquisition

Windows Image Acquisition (WIA) is a Windows service supporting the communication between the computer and scanners. Furthermore, the Non-activation of WIA may result in scan job failure. Thus, scrutinize the scanner's WIA activation.

Furthermore, you can call us +1-844-876-5110 to know more on scan setup